Daiwa TANACOM 1000 - Manual (Page 24)

22
1. Clutch OFF to send the rig to the bottom
Functional setting operation
(6. Inverse counter)
Inverse counter
OFF
Two counters are better than one. This reel has counters from both the surface and from the bottom.
The default inverse counter setting is OFF. To turn it ON, see page 26.
In the following example, intended fishing range is 94 m, which is 6 m from the bottom.
1
2. At the bottom, move the clutch to ON by turning the reel handle
or flipping the clutch lever.
3. After winding up any slack line, press the INVERSE COUNTER
BUTTON and wind up 6 m.
By pressing the INVERSE COUNTER BUTTON , the lower area
counter is reset. Wind line until the intended depth is reached.
Use
By pressing the INVERSE COUNTER
BUTTON, the timer starts and keeps an
accurate record of fishing time.
ON
3