Leica Geosystems Leica DISTO transfer - How to connect - Manual (Page 24)

24
Leica DISTO™ transfer
Troubleshooting with the Bluetooth driver

Make sure the Bluetooth hardware is activated on your computer
respectively the dongle is plugged in. If you are using an external
Bluetooth dongle you have to install a Bluetooth Stack/Driver first. In
order to do this please do not install the driver that comes with the
dongle but please plug in the dongle and boot your computer. After the
new hardware has been detected by windows operating system please
choose to install the standard driver (recommended one = Microsoft).

To connect a Bluetooth hardware with a PC a Bluetooth stack (driver)
must be installed on your computer. There are many different drivers
existing. The most common ones are from Microsoft and Broadcom
(driver is called Widcomm).

Leica DISTO™ transfer supports stacks from following companies:

Microsoft (comes with the Windows operating system)
 Broadcom (Widcomm driver)