Leica Geosystems Leica DISTO transfer - How to connect - Manual (Page 29)

29
Leica DISTO™ transfer
Troubleshooting with the Bluetooth driver
 Solution 2 (cont.):
 Check below field for using the vitual COM port
 Start the Bluetooth Manager and pair the DISTO™ with your computer. Probably
you have to enter a code which is „0000“

Start the Leica DISTO™ transfer again. The program window will immediatelly
appear and the different COM-ports will be polled until the Leica DISTO™ is found.
Here you find the name of the installed
Bluetooth stack (Best results with
Microsoft or Widcomm)
Do not use this selection
Please note: This solution with virtual com-port
does not work on Computer with Windows 8