Leica Geosystems DISTO + Bluetooth – getting started on iOS - Manual (Page 22)

22 22
Leica DISTO™ sketch for iOS
Good to know
 Auto-scale only works on rectangular sketches and it will not change any room
angle on the sketch from being 90°
 The Leica DISTO™ device only sends the currently measured value. To send a
result from the main line of the DISTO™ press the „=„ key on the D810 touch or
D510. For the D110 press the Bluetooth® key to send a result from the main line.

You can also send any measurement value to the Text input field
Press short to send the
measurement value from the
main line of the display (e.g. area)