Leica Geosystems DISTO + Bluetooth – getting started on iOS - Manual (Page 25)

25 25
Keyboard Mode with iOS
How to start
 This mode is only supported by the Leica DISTO™ D810 touch
 You can use either the iOS Bluetooth® manager to pair the devices or the Leica
DISTO™ sketch App. Once the iOS device and the Leica DISTO™ are paired they
will immediatelly connect if both are switched on.
 The Leica DISTO™ will be considered as a keyboard. So by sending a
measurement the iOS device believes you are writing the value on a keyboard.
 You need to either set the DISTO™ D810 touch to following modes (see also
page 10 of this presentation)
 Spreadsheet mode:
Use for sending decimal values
without unit for further calculation
 Text mode:
Use for sending values an on the device display
incl. unit for documentation