Leica Geosystems Roteo 20HV, 25H, 35, 35G - Manual (Page 20)

17 Safety Directions Roteo 20HV/25H/35/35G - 1.2.0en
D
EN
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
H
RUS
CZ
Cleaning and Drying
Product and Accessories
• Blow dust off optical parts.
• Never touch the glass with your fingers.
• Use only a clean, soft, lint-free cloth for cleaning. If
necessary, moisten the cloth with water or pure
alcohol.
• Do not use other liquids; these may attack the polymer
components.
Damp Products
• Dry the product, the transport container, the foam
inserts and the accessories at a temperature not
greater than 40°C / 104°F and clean them.
• Do not repack until everything is completely dry.
Cables and Plugs
• Keep plugs clean and dry.
• Blow away any dirt lodged in the plugs of the
connecting cables.
Safety Directions
General
Description
The following directions should enable the person
responsible for the product, and the person who actually
uses the equipment, to anticipate and avoid operational
hazards.
The person responsible for the product must ensure that
all users understand these directions and adhere to
them.
Intended Use
Permitted Use
• The instrument casts a horizontal laser plane for the
purposes of alignment.
• The unit can be set up on it’s own base plate, wall-
mount or on a tripod.
• The laser beam can be detected by means of a laser
detector.
• This product is intended for indoor use and applica-
tions.
Adverse Use
• Use of the product without instruction.
• Use outside of the intended limits.
• Disabling safety systems.
• Removal of hazard notices.
• Opening the product using tools, for example screw-
driver, unless this is specifically permitted for certain
functions.
• Modification or conversion of the product.
• Use after misappropriation.
• Use of products with obviously recognizable damages
or defects.
• Use with accessories from other manufacturers
without the prior explicit approval of Leica Geosys-
tems.
• Inadequate safeguards at the work site, for example
when using on or near roads.