Leica Geosystems Leica DISTO A2 - Manual (Page 6)

3 Functions Leica DISTO™ A2 1.1.0 gb
d
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
H
RUS
CZ
Area
The result is displayed in the main line.
Volume
The area of the two values measured is displayed in
the main line.
The resulting volume is displayed in the main line.
Staking out of constant distances
Constant distances can be entered for staking out
purposes. The DISTO's display shows the to be staked
out distance as well as multiples of the distance. As
soon as the defined stake out distance is reached the
DISTO beeps.
Inputting a stake out distance: Press and hold the
, key, the auxiliary line will blink with crosslines.
Change the value in the main line with and
keys until the desired staking out distance is
displayed. Holding the
and down will speed
up the adjustment.
By pressing the key the staking out distance or
multiples of it are displayed in the auxiliary line; the
laser measuring starts. In the main line the distance
between the staking out point (in the auxiliary line)
and the DISTO (rear measuring reference) is
displayed.
If the DISTO is moved along the staking out line, the
displayed distance is reduced. At a distance of 0.1 m
to the next staking out point the DISTO starts to
beep. As soon as the staking out point is reached, the
beep changes and the auxiliary line starts to blink.
Repeat this procedure as often as needed.
The function is stopped by pushing the key.
Press this key once. This symbol is
displayed.
Press key and take the first measurement (e.g.
length)
Press key again and take the second measure-
ment (e.g. width)
Press this key twice.This symbol is
displayed.
Press key and take the first measurement (e.g.
length)
Press key again and take the second measure-
ment (e.g. width)
Press the key to take the third measurement
(e.g. height). The value is displayed in the
second line.