Leica Geosystems Leica DISTO E7400x - Manual (Page 6)

Leica DISTO TM E7400x 788480a 5
EN Operations
Multifunctional endpiece
i
The orientation
of the endpiece
is automatically
detected and
the zero point is
accordingly ad-
justed.
Distance unit setting Tilt unit setting
Switch between the
following units:
0.000 m
0.0000 m
0.00 m
0.00 ft
0‘00‘‘ 1/32
0‘00‘‘ 1/16
0‘00‘‘ 1/8
0‘00‘‘ 1/4
0.00 in
0 in 1/32
0 in 1/16
0 in 1/8
0 in 1/4
2 sec
Switch between the
following units:
0.0 °
0.0 %
2 sec
simultaneously
Timer (automatic release)
s
1
Adjust delay of auto-
matic release (max.
60 sec, standard set-
ting 5 sec)
2
i
Once the key is released with the la-
ser activated, the remaining seconds
until the measurement are displayed
in a countdown. The delayed release
is recommended for precise aiming
e.g. at long distances. It avoids shak-
ing of the device when pressing the
measurement key.