Leica Geosystems Leica DISTO E7500i - Manual - Manual (Page 15)

Leica DISTO TM E7500i 792324a 14
EN Functions
Adjusting measuring reference/tripod
1 2 3
Distance is measured from the rear of the
device (standard setting).
Distance is measured from the front of the
device (lock symbol = permanently).
Distance is measured from the tripod
thread permanently.
4
Confirm setting.
i
If device is switched off, reference
goes back to standard setting
(rear of the device).
If you use an original Leica DISTO
adapter, the reference does not
need to be adapted to tripod
thread!
Memory
1 2
12.208 m
6.554 m
23.889 m
8.449 m
8.449 m
3
Switch between
measurements.
Take over value for
further actions.
Delete memory.
4
Use Up/Down
navigation keys to
show more detailed
results of the speci-
fic measurement.
i
Short cut