Leica Geosystems Leica DISTO E7500i - Manual - Manual (Page 6)

Leica DISTO TM E7500i 792324a 5
EN Operations
Switching ON/OFF Clear Message Codes
ON OFF
2 sec
Device is turned
OFF.
i
If no key is
pressed for 180
sec, the device
switches off au-
tomatically. 1x
Undo last action.
2x
Leave actual func-
tion, go to default
operation mode.
If the info icon appears with a
number, observe the instructions in
section "Message Codes".
Example:
Multifunctional endpiece
i
The orientation
of the endpiece
is automatically
detected and
the zero point is
accordingly ad-
justed.
Permament / Minimum-Maximum measuring
1
2 sec
8.532 m
Used to measure room diagonals (maximum val-
ues) or horizontal distance (minimum values)
The minimum and maximum dis-
tance measured is displayed (min,
max.). The last value measured is
displayed in the main line.
min. max.
2
Stops permanent / minimum-
maximum measuring.
3