Leica Geosystems Leica DISTO - online program manual - Manual (Page 18)

14
••••
Reference: The pages and dialogs of DISTO online User's Guide to DISTO Online
The Page "Send" in the Simple Mode
Do not transmit, only record
All measurements from the DISTO are only logged into the measurement record.
Send to current input position
All measurements from the DISTO are formatted as you chose in "Data Format"
and were transmitted to the current input position. Additionally the
measurements are logged into the measurement record.
Measured_value
Only the measured value is transmitted.
Measured_value[Return]
Only the measured value is transmitted followed by a "Return".
Measured_value[Tab]Unit[Return]
The measured value followed by a "Tab" and the pertinent unit followed by a
"Return" is transmitted.
Position[Tab]Measured_value[Tab]Unit[Tab]Code_A[Tab]....
Accordingly some data are sent separated by tabs followed by a terminating
"Return"