Leica Geosystems Leica DISTO - online program manual - Manual (Page 24)

20
••••
Reference: The pages and dialogs of DISTO online User's Guide to DISTO Online
The Dialog "Select DISTO and PORT"
Select DISTO
In this selection list all at present well-known DISTO are listed. If one is selected
this, then the fields Baud rate, data bit, parity and stop bit become automatically
pre-set to the factory setting's of the respective DISTO.
Present well-known DISTO types are
DISTO GSI
DISTO memo²/pro²
DISTO pro
4
Port
In this selection list all available serial interfaces of the computer are to be listed,
i.e. interfaces occupied by another program are not listed here.
Baud rate
Select here the Baud rate for communication with the Leica DISTO. Possible
Baud rates are from 110 to 56000 Baud.
Data bit
Select here the number of data bits for communication with the Leica DISTO.
Possible data bit settings are 7 or 8
Parity
Select here the communication parity bit Possible values are none, even or odd
parity
Stopbit
Select here the number of stop bits for communication with the Leica DISTO.
Possible values are 1, 1.5 and 2.