Leica Geosystems Leica Racer 70 - Manual (Page 6)

5 Operation Leica Racer 70 784117
GB
D
N
S
FIN
DK
SLO
TR
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
abnormal use, and before, during and after important
measurements.
Make sure the Leica Racer optic is kept clean and that
there is no mechanical damage to the bumpers.
ƽ
CAUTION:
In using the instrument for distance measure-
ments or for positioning moving objects (e.g. cranes,
building equipment, platforms, etc.) unforeseen
events may cause erroneous measurements.
Precautions:
Only use this product as a measuring sensor, not as
a control device. Your system must be configured and
operated in such a way, that in case of an erroneous
measurement, malfunction of the device or power
failure due to installed safety measures (e.g. safety
limit switch), it is assured that no damage will occur.
Switching on/off
1x briefly: the instrument and the laser are
switched on.
The display shows the battery symbol until
the next button is pressed.
Pressing this button for longer switches the
instrument off.
The instrument switches off automatically after
three minutes of inactivity.
Setting the unit
Press long until the desired unit is displayed.
Possible units:
CLEAR-Key
1x briefly: the last action is cancelled.
Distance Area Volume
1. 0.000 m 0.000 m² 0.000 m³
2. 0'0''
1
/
8
0.000 m² 0.000 m³
3. 0 in 1 /
8
0.000 m² 0.000 m³
4. 0'0'' 1 /
16
0.00 ft² 0.0 ft³
5. 0 in
1
/
16
0.00 ft² 0.0 ft³
6. 0.00 ft 0.00 ft² 0.0 ft³