Leica Geosystems Leica Racer 70 - Manual (Page 7)

6 Operation Leica Racer 70 784117
GB
D
N
S
FIN
DK
SLO
TR
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
Reference Setting
Default reference setting is from the rear of the
instrument.
The instrument can be set for the following measure-
ments:
• To measure from an edge, fold out the posi-
tioning bracket until it snaps in for the first time.
• To measure out of a corner, fold out the stop
bracket until it snaps in, push the stop bracket
with a little force to the right side; the stop
bracket can now be completely unfolded.
)
The device automatically recognises the
measurement position and adjusts the following
measurement.
1x briefly: the next measurement is taken from
the front edge. After one measurement, the
reference returns automatically to the default
setting (rear reference).
2x briefly: the measurement is taken from the
rear reference (default setting).
1x long: The measurements are taken continu-
ously from the front edge. A brief press on the
key cancels the continuous measurement
setting again.