Tracking (h), Signal measurement (k), Temperature measurement (t) – Leica Geosystems Leica DISTO OEM Module 3.0 WH15/WH30 User Manual
Page 10: Laser (o, p), Software version (00), Hardware version (01), Serial number (02), Date of manufacture (03), Setting distance offset (44), Technical reference manual
Technical Reference Manual
V1.20
10/12
725538.doc
08.11.01
DISTO
DISTO
DISTO
DISTO
TM
TM
TM
TM
OEM module 3.0 WH15/WH30
OEM module 3.0 WH15/WH30
OEM module 3.0 WH15/WH30
OEM module 3.0 WH15/WH30
6.2.7. Tracking
(H)
Function:
Triggers continuous measurement of distance. The measurements are continued until the next
command is issued or until a fault arises.
GSI IN:
H<trm>
GSI OUT:
WI31<trm>
or @Exxx<trm>
6.2.8.
Signal measurement (k)
Function:
Triggers continuous measurement of the signal. The measurements are continued until the
next command is received or until a fault arises.
GSI IN:
k<trm>
GSI OUT:
WI53<trm>
or @Exxx<trm>
6.2.9.
Temperature measurement (t)
Function: :
Triggers measurement of temperature.
GSI IN:
t<trm>
GSI OUT:
WI40<trm>
or @Exxx<trm>
6.2.10.
Laser (o, p)
Function:
Switches laser on or off.
GSI IN:
o<trm>
Switches laser on
p<trm>
Switches laser off
GSI OUT:
?<trm>
or @Exxx<trm>
6.2.11.
Software version (00)
Function:
Outputs software version at interface.
GSI IN:
N00N<trm>
GSI OUT:
WI13<trm>
or @Exxx<trm>
6.2.12.
Hardware version (01)
Function:
Outputs instrument type at interface.
GSI IN:
N01N<trm>
GSI OUT:
WI14<trm>
or @Exxx<trm>
6.2.13.
Serial number (02)
Function:
Outputs serial number at interface.
GSI IN:
N02N<trm>
GSI OUT:
WI12<trm>
or @Exxx<trm>
6.2.14.
Date of manufacture (03)
Function:
Date of manufacture at interface.
GSI IN:
N03N<trm>
GSI OUT:
WI15<trm>
or @Exxx<trm>
6.2.15.
Setting distance offset (44)
Function:
Sets distance offset. The offset is added to each distance measured. Setting is nonvolatile!
GSI IN:
N44N%N<trm>
%: Distance offset [1/10mm] within the range ±29.999m
GSI OUT:
WI58<trm>
or @Exxx<trm>