Leica Geosystems Leica DISTO OEM Module 3.0 WH15/WH30 - Manual (Page 8)

Technical Reference Manual
V1.20
8/12
725538.doc
08.11.01
DISTO DISTO DISTO DISTO
TM TM TM TM
OEM module 3.0 WH15/WH30 OEM module 3.0 WH15/WH30 OEM module 3.0 WH15/WH30 OEM module 3.0 WH15/WH30
5.4. Error reports
No. Format Meaning
203 @E203
Prohibited parameter in command entry, or prohibited command, or non-valid
result
217 @E217 Parameter set-up incorrect (Contact Leica Geosystems)
221 @E221
Parity error (Prior to contacting Leica Geosystems please check the Terminal
settings)
222 @E222
Interface buffer overflow
(Contact Leica Geosystems if error occurs when sending less than 24
characters)
223 @E223
Interface framing error
(Contact Leica Geosystems)
224 @E224
GSI buffer overflow
(Contact Leica Geosystems if error occurs when sending less than 24
characters)
252 @E252
Temperature too high
(contact Leica Geosystems if error occurs at room temperature)
253 @E253
Temperature too low
(contact Leica Geosystems if error occurs at room temperature)
255 @E255
Received signal too weak, distance < 250mm
(Use different target and distances, if the problem persists, please contact Leica
Geosystems)
256 @E256
Received signal too strong
(Use different target and distances, if the problem persists, please contact Leica
Geosystems)
257 @E257
Too much background light
(Use different target and distances, if the problem persists, please contact Leica
Geosystems)
272
to
299
@E272 Hardware failure (Contact Leica Geosystems)
Before contacting Leica Geosystems please collect as much information as possible.