Leica Geosystems Leica DISTO A6 - User Manual - Manual (Page 5)

2 Start-up Leica DISTO™ A6 1.1.0 gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
H
RUS
CZ
push to the right the bracket can be turned
further. See figure {D and F}.
A built-in sensor automatically detects the orienta-
tion of the positioning bracket and calculates the
corresponding distances accordingly.
Integrated telescopic viewfinder
The device is equipped with a telescopic viewfinder
on the right hand side. The viewfinder is especially
helpful when aiming at distant targets. When looking
through the viewfinder, the target is clearly visible
thanks to the 2x magnification. At distances beyond
30 m laser spot is centered on the crosshair, below
30 m the laser spot appears on the edge of the cros-
shair, which is normal.
Level
The integrated bubble level allows simple horizontal
levelling of the instrument.
Keypad
See figure {A}:
1
ON/MEASURING
2 2nd FUNCTION LEVEL
3 PLUS [+]
4 TIMER
5 EQUAL [=]
6 AREA/VOLUME
7 STORAGE
8 MEASUREMENT REFERENCE
9 CLEAR/OFF
10 MENU
11 ILLUMINATION
12 INDIRECT MEASUREMENT (PYTHAGORAS)
13 MINUS [-]
14 BLUETOOTH
®
Display
See figure {B}
1
Information about faulty measurements
2 Laser active
3 Circumference
4 Maximum value of continuous measurement
5 Minimum value of continuous measurement
6 Measurement reference
7 Recall of Historical Storage
8 Storage of constant
9 Main line
10 Units with exponents (
2
/
3
)
11 Ceiling area
12 Wall area
13 Three auxiliary lines (e.g. previous results)
14 BLUETOOTH
®
on/off
15 2nd Function Level on
16 Hardware error
17 Indirect measurement - Pythagoras
18 Indirect measurement - Pythagoras - partial height
19 Area / Volume
20 Offset setting
21 Battery indication