Leica Geosystems TPS800 DXF Export - Manual (Page 2)

TPS400 and TPS800 DXF Data Output Page
2
dxf3DP+C
This option creates a 3D DXF file of the measured points, which are placed in a layer
called Point, using a cross symbol. The Point Numbers and the Codes, recorded in
Code field in the Codelist, are placed in the layer Code. A space is placed in front of
the Point Number and another between the Point Number and the Code.
+
PointId Code
dxf2DPC
This option creates a 2D DXF file of the measured points, which are placed in a layer
called Point, using a cross symbol. The Point Numbers are placed in the layer Pt_no
and the Codes, recorded in Code field in the Codelist, are placed in the layer Code.
There is not sufficient scope to move the text fields so both the Point Number and
Code are placed adjacent to the cross but on different layers.
+
PointId
+
Code
dxf2DP+C
This option creates a 2D DXF file of the measured points, which are placed in a layer
called Point, using a cross symbol. The Point Numbers and the Codes, recorded in
Code field in the Codelist, are placed in the layer Code. A space is placed in front of
the Point Number and another between the Point Number and the Code.
+
PointId Code
dxf3DC+H
This option creates a 3D DXF file of the measured points, which are placed in a layer
called Point, using a cross symbol. The Height is placed in the layer Height.
+
Height
dxf2DC+H
This option creates a 2D DXF file of the measured points, which are placed in a layer
called Point, using a cross symbol. The Height is placed in the layer Height.
+
Height