If the tray does not eject automatically – Panasonic SQ-TC512F User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSERTING/REMOVING DISCS
If the tray does not eject automatically
1
2
Turn OFF your computer.
Open the front cover of the CD-
ROM Changer carefully.
Insert the eject pin.
1 Gently push the pin along the right
edge of the left slot until the pin
stops.
The tray will eject a little.
2 Pull the pin out and then push it
again about four times until the tray
is extended enough that you can pull
it out by hand.
Mechanism inside works as follows:
Along the Right
Edge of the Left
Slot
Eject Pin
Insert
the pin.
Push the pin
forward until
it stops.
Pull the
pin out
then push
it again.
Pull the tray the rest of the way by
hand.
(The tray currently in the play position
and the tray immediately below it can
both be pulled out by hand.)
Remove the disc from the tray and
turn ON your computer.
(This is to check, if the Changer returns
to normal position.)
Disc
If the CD-ROM Changer becomes Jammed, please contact our hotline for assistance.
(1-800-726-2797)
10