Panasonic SQ-TC512F - Manual (Page 8)

BEFORE USING/SHIPPING THE CD-ROM CHANGER
Removing the Shipping Spacer
Before using the CD-ROM Changer, you must remove the shipping spacer from the disc tray. Install the
Driver and Utility only after you have removed the spacer.
Failure to do this may damage your disc on the changer.
1 Turn the computer ON.
The CD-ROM Changer will turn ON.
^ Turn OFF the computer.
NOTE:
Save the shipping spacer and box. You will need them when moving or shipping the equipment.
Caution for Shipping
Be sure to take the following precautions before moving your Changer a considerable distance, shipping the
changer, or taking it in for service.
Insert the shipping spacer into disc tray 1.
{This is also necessary if moving your computer with the CD-ROM Changer still installed.)
Shipping Spacer
1 Turn your computer ON.
The CD-ROM Changer will turn ON.
2 Remove all discs.
3 Press DISC EJECT button 1.
Disc tray 1 will eject.
4 Insert the shipping spacer into disc tray 1.
5 Push the tray until it retracts automatically.
6 Turn OFF the computer.
Disc T ray 1
2 Check for the white mark next to tray “1 ”
on the disc window. If the white mark is
still visible, press and hold tray button
number 1 until the white mark disap­
pears.
^ Your Changer is ready for shipping.
Pack the Changer in the originai box.
V"
Slide the tabs
into the front
of the tray and
lay the spacer
down.
Pwmtmia sottt co-now CHW»nsoTC$ijf
E^B SPEED SCSI
B *^9
I
1—>0’ W o : ^ o Ф Ф Ф Ф ^
Disappear
8