Power supply – Panasonic KX-RC95 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power Supply
CPA has two power sources:
• Household AC (AC 120 V)
• Rechargeable Ni-Cd battery (built-in CPA)
From household AC
Before operating CPA connect it to the household AC outlet (AC 120 V) with
the AC adaptor for about three (3) hours in order to charge the battery.
(While charging you can operate CPA. However, it will take longer for it to
W
(D
O
(D
5'
(Q
Use only the supplied AC adaptor.
Other adaptors may damage CPA.
Using the rechargeable Ni-Cd battery
When connected to household AC as illustrated above, the built-in Ni-Cd
battery automatically charges itself.
A full battery charge requires about three (3) hours.
After charging, disconnect the AC adaptor from CPA and the AC outlet.
CPA can now be operated from battery power.
The printing capability of the fully charged battery is about 50 sheets for
check printing or about 35 pages for report printing at 25°C (77°F).
For "Showing Remaining Battery Power”, refer to
p.
44.
?
I
ATTENTION:
The product that you have purchased contains a recharge
able battery. The battery is recyclable. At the end of it’s
useful life, under various state and local laws, it may be
illegal to dispose of this battery into the municipal waste
stream. Check with your local solid waste officials for de
tails in your area for recycling options or proper disposal.
NFCd
1 1