Panasonic KX-RC95 - Manual (Page 22)

Setting Print Positions on Your Check
O When a position on your check corresponds to neither “A” nor “B”.
X
s ® Place the template on the top of your check.
@ Fit the bottom-left corner of your check in the bottom-left corner of the
^ template, then insert the remaining corners. Align the bottom and left side
C of your check with bottom and left lines on the template.
^ (3) Check to see where the bottom-left point of each of five (5) data items
correspond to on the template ruler.
Example: Setting print position for “DATE” according to the template ruler
(X=60, Y=39).
o
S
s
?
g
o
o
3T
Operation
® Select position of “DATE” (Select R).
(SETUP ENTER 1
(Select PRINTER)
(gl Enter “X” and “Y” points.
[ENTER
Display/Description
DATE : ABg PAY ; A
D D L . : A MEMO : A
$ : B
ENTER X
DATE X=60 Y=39n
• By entering numbers not within
the range setting (X; 14 to 99,
Y; 11 to 42) of each of the five
(5) items, the print positions
will be automatically set on the
Maximum or Minimum value of
the X, Y coordinates.
• If you want to print a demo,
see p. 21.
Return to initial display.
[ ENTER l-^ÎDÔNË1-^fDÔNËl
JAN.28,1994 FRI
11:03 PM
How to correct a mistake
•Clear the incorrect letters/numbers under the cursor by pressing
® / ( B / S / S and (DfLUD.
• If “PRINTING AREA OVER CONTINUE NA^?” is displayed when you
attempt to print a demo, it means that you have entered a number that
will cause data to be truncated when printed. Press “Y” to print the
demo or press “N” and re-enter the data.
22