Panasonic CT-32G32U - Manual (Page 10)

Location of Controls (Remote)
Basic Remote Control Functions
The following is an overview of the Remote Control unit for television operation. Ensure the
TV mode is selected by initially pressing .
Multi Button
Programmable to operate up to six
Remote Control Function buttons
simultaneously.
Power Button
Press to turn ON or OFF.
Mode Selection Buttons
Select the operation mode for the
remote control.
Volume Buttons
Press to adjust TV sound level.
Use with Channel buttons to
navigate in menus.
Action Button
Press to display Main Menu and
access or exit On Screen feature
and Adjustment Menus.
R-Tune (Rapid Tune) Button
Press to switch to the previous
channel.
PIP Move Button
Press to position PIP frame to any
corner of the Main Picture (when PIP
frame is displayed).
PIP Freeze Button
Press to stop action in the Main
Picture or PIP frame (when the PIP
frame is displayed).
PIP Size Button
Press to select size of PIP frame
(when the PIP frame is displayed).
PIP Search Button -----------------------
This button is used to select PIP
Search to automatically scan
channels within the PIP Frame.
Keypad “0 through 9” Buttons
Press desired channel number to
randomly access any channel.
TV/Video Button
Press to select TV or one of two Video
Inputs, for the Main Picture or the PIP
frame (when the PIP frame is displayed).
Mute Button
Press to mute sound. A second press
resumes sound.
Channel Buttons
Press to select channels. Use with
Volume buttons to navigate in menus.
Recall Button
Press to display Time, status of Sleep
Timer, Channel, Video Mode, Channel
Caption (Station Identifier) and Audio
Mode.
PIP (Picture In Picture) Button
Press to display the PIP frame, press
again to remove PIP frame.
PIP Swap Button
Press to interchange PIP frame with Main
Picture (when the PIP frame is displayed).
VCR Function Buttons
Programmable to operate many brands of
VCR’s.
VCR/DSS (PIP) Channel Buttons
Select VCR or DSS Up/Down channels.
Or, to select the channels within the PIP
Frame UP or DOWN (when PIP frame is
displayed.)
Home Theater Remote Control
EUR511050
Note:
For more information on the Remote
Control, please refer to the Remote
Control Quick Reference Functional Key
Chart.
Helpful Hints:
If the selected component does not
respond to the remote control, ensure
that the proper mode is selected.
First, press the Mode Selection
Button that corresponds to that
component. For example, after first
pressing the TV Mode Button, the
remote will remain in the TV mode for
the following commands. If a different
mode button is pressed while
operating the television, the TV mode
button must be pressed again to
enable the TV mode condition.
- 1 0 -