Panasonic CT-32G32U - Manual (Page 21)

Channel Caption
This feature allows you to enter the call names of up to 30
stations into memory (using up to 4 characters for each
station). The call name will then display along with the
channel number when changing channels or pressing
RECALL.
CH 03 J.
yvY 7 m Channel Caption
(Station Identifier)
1. Press
2. Press or^^ and or to highlight the Channel
Caption Icon.
3. Press to display the Channel Caption Menu.
5.
6 .
7.
enter the channel number you wish to assign a Station
Identifier.
Press ^ to highlight ENTER CAPTION.
Press or to select first character in Station
Identifier. Then press ^ to move cursor to the second
position and repeat until the complete Station Identifier
is entered (up to 4 characters).
Press
A
or ^ to highlight ENTER CHANNEL
NUMBER. Then repeat steps 4 through 6 to continue
adding Channel Station Identifier(s).
8. Press twice to exit menus.
NOTE: To delete a Channel Caption (Station Identifier) from
memory all four character positions in the “ENTER
CAPTION” area must display a dash mark (-).
U0lptui0mtBi
When the Maximum amount of station identifiers are
entered, “FULL” will be displayed in the caption
position.
Timer Features
Sleep Timer
This feature is used for automatic turn off in 30, 60 or 90
minutes. Display will flash 3,2 and 1 to indicate the last three
remaining minutes prior to turn off. The Recall display will
also appear.
NOTE: This feature will be disabled when Auto Power
On is activated.
1
.
2 .
3.
Press
Press^^or^^ and^^or^ to highlight the Timer Icon.
Press ^3) to display the Timer Control Menu.
4.
5.
Press ^ to select NO, 30, 60 or 90 minutes (Sleep
Timer will be activated).
Press (^3 twice to exit menus.
NOTE: To deactivate Sleep Timer repeat steps 1 through 4.
In step 4 select “NO” instead of minutes.
Help№ints:
Press the RECALL button to display the remaining
minutes for Sleep Timer, the status will display in the
bottom left corner.
-21
-