Panasonic PANASYNC E70G TX-D7F21 - Manual (Page 10)

Pin Assignment
Follow the instructions below to connect the E70G to a computer.
A. Signal connector: 15 pin mini D-Sub (PS / 2 or PC / AT compatible model)
Connect the signal cable to the 15 pin mini D-Sub connector on the display unit.
B. Signal connector: 15 pin D-Sub (Apple computer)
Convert a MAC 15 pin D-Sub connector to a 15 pin mini D-Sub connector using a Panasonic MAC
adapter, and connect it to the 15 pin mini D-Sub connector on the display unit.
< REAR PANEL > Pin assignments of 15 pin mini D-Sub connector
Pin number Signal name
1 Red video signal
2 Green video signal
3 Blue video signal
4 Ground
5 Ground*
6 Ground for Red video signal
7 Ground for Green video signal
8 Ground for Blue video signal
9 Unused
10 Ground
11 Ground
12 SDA* (Bi-directional Data)
13 Horizontal sync, signal
14 Vertical sync, signal
15 SCL* (Data Clock)
*: “VESA’s Display Data Channel (DDC) Standard
External View
Dimensions Pan / Tilt range
Width 405 mm (15.9") Up 13 degrees
Height 404.5 mm (15.9") Down 4 degrees
Depth
Base diameter
Height without stand 425 mm (16.7")
<t> 240 mm (((> 9.4")
373 mm (14.7")
Left, right : 90 degrees each
8