Specifications – Panasonic PANASYNC E70G TX-D7F21 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Specifications

CRT Size

17" CRT (16.0“ / 40.6 cm Viewable Image Size) Flat Square

Dot-pitch

0.27 mm (H: 0.236 mm x V: 0.137 mm)

Phosphor/Glass

RGB short persistence (Hi-EU RED), Crystal Pigment / Dark tint

Surface treatment

Advanced AGFiAS (Anti-Glare, anti-Reflective and Anti-Static) Coat

Input signals Video signaling

RGB analog

Signal level

0.7 Vp-p (without sync, signal), 1.0 Vp-p (with sync, signal)

Sync, signal

H / V separate (TTL level), H / V composite (TTL level),
Sync.-on-green is not available.

Frequency Range

Allowable Horizontal Frequency : 30.0 kHz to 70.0 kHz

Allowable Vertical Frequency : 50.0 Hz to 160.0 Hz

Preset mode

1 preset and 7 reservation (See page 13)

Video Maximum Pixel Clock

108 MHz (typ.)

Resolution

1,280 dots (H)

X

1,024 lines (V) at 60 Hz*

Viewable Image Size Factory preset

(H

X

V, Diagonal) Full scan (Typical)

11.81" X 8.86", 14.8" Diagonal **
12.80"

X

9.60", 16.0" Diagonal **

Display Color

Analog input, unlimited number of colors ***

Connectors Video Signal

15 pin mini D-Sub connector (female pins)

Power supply

CEE-22 type 3-pin connector

Input power

100-240 V (50/60 Hz)

Power consumption

95 W typ. / < 15 W stand-by, < 8 W sleep mode (See page 12)

Controls Front

Power ON / OFF, Q], a, B, H] keys

On screen display

Contrast, Brightness, Size & Pos. ( H. Position, H. Size, V.

Position, V. Size), Geometry (V. Pincushion, Side Pin. Balance,

Trapezoid, Parallelogram), Rotation (Tilt), Color Temp. (9300 K

-H 8 MPCD, 7500 K, 6500 K, 5000 K, User Color adjustment),

Recall, Video Level select (0.7 V /1 V), Language select

(French, English, Spanish), OSD Position, Degauss, Signal,
Monitor Self-Test

Tilt/ swivel

13° up, 4° down, 90° each to right and left

Dimensions (W x H x D)

15.9"

X

15.9"

X

16.7"

(405 mm x 404.5 mm x 425 mm)

Weight (monitor only)

15.8 kg (34.7 lbs)

Approvals

UL1950, CSA 22.2 No.950, DHHS,
FCC Class B, MPR II, NUTEK,

VESA DPMS /

E

nergy

S

tar

®

Standard

1 detachable signal cable for VGA, SVGA
1 detachable AC power supply cord

Operating Instructions, Warranty card

Environmental conditions Operating

Temperature 0 to 35 'C (32 to 95 *F)

Humidity 5 to 90% (no condensation)

Altitude 10,000 ft

Storage

Temperature -20 to -t-60 °C (-4 to 140 °F)

Humidity 5 to 90% (no condensation)

Altitude 40.000 ft

Windows® 95 / 98 Plug & Play

VESA® DDC'TM 1 / 2B meets Windows® 95 / 98 Plug & Play

Requirements

Note;

• The on-screen image may flicker if the display is operated with the Vertical freq, under 60 Hz.
* This monitor may only be used in a commercial or industrial environment at resolutions above 1,024

x

768 at 75 Hz.

** Depends on signal timing used, see page 13,

*** Number of colors depends on the Video Board used, memory installed, and RAMDAC (Random Access Memory

Digital to Analog Converter).

Specifications and design are subject to change without notice.
This product may be subject to export controi regulations.
Weight and dimensions shown are approximate.

Advertising