Display nat all – Panasonic 8000 User Manual

Page 148

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

4 NAT troubleshooting

Nortel Secure Router 8000 Series

_________ Troubleshooting - VAS

GlobalAddr GlobalPort

Interface:Ethernet4/0/6

5 . 1 . 1 . 5 (5,3000)

21 10

5 . 1 . 1 . 5 (5,3000)

21 10

Total 2 NAT servers

InsideAddr

InsidePort

Pro

VPN

4 , 1 , 1 , 1

3211

6(tcp)

(1)

4 , 1 , 1 , 2

3000

6(tcp)

(1)

Table 4-6 Description of the output information of the display nat server command

Item

Description

GlobalAddr

The interface configured with the NAT outbound feature

GlobalPort

The configured ACL

InsideAddr

The index of the address pool (here 5)

InsidePort

The port number of the internal network IP

Pro

The number of the protocol (here 6, the TCP protocol)

VPN

VPN

Total

The number of configured NAT servers

display nat all

<Nortel> display nat all

NAT address-group information:

0 :

from

1 0 , 1 1 0 , 1 , 1

t o

1 0 , 1 1 0 , 1 , 3 0 ,

reference

0 times

10 :

from

1 0 0 , 1 , 1 , 1 0

t o

1 0 0 , 1 , 1 , 2 0 ,

reference

1 times

18 :

from

1 0 , 1 1 0 , 2 7 , 1

t o

1 0 , 1 1 0 , 2 7 , 1 0 0

reference

0 times

Total

3 add ress-groups

NAT outbound information :

Ethernet1/0/0: acl(3100)--------------- NAT address-group(10)

Server in private network informat^ion:

GlobalAddr GlobalPort InsideAddr InsidePort Pro VPN

Interface:Ethernet3/0/0

1 9 2 , 1 6 8 , 1 0 , 2

------ 1 0 0 , 1 , 1 , 2

------ - - -

(1)t^ime

Total 1 NAT servers

NAT application level gateway information:

netbios NAT application level gateway is enabled

^ls NAT application level gateway is enabled

ftp NAT application level gateway is enabled

icmp NAT app^icat^ion level gateway is enabled

The following sections describe the information in the preceding display.

Three address pools are configured as follows:

The numbers of the address pools are 0, 10, and 18 respectively.

The No.10 address pool is referred once.

Configure an association of the address translation on the interface Ethernet1/0/0 as follows:

The ACL rule 3100 is associated with the No.10 address pool.

The address translation uses the PAT mode.

4-18

Nortel Networks Inc.

Issue 01.01 (30 March 2009)

Advertising