Panasonic AUTO-LOGIC KX-F3500 - Manual (Page 27)

Printout Function
(cont.)
[JOURNAL Example]
<<< JOURNAL >>>
( 1 )
Jul.20. 1988
( 2 )
0i:34 PN
(3)
No.
(4)
OTHER FACSIMILE
(5)
MODE
(6)
START TIME
(7)
USAGE TIME
(8)
PAGES
(9)
RESULT
01 1736852 TXCG3) Jul.20 li:39AM 00'42 01 OK
02 INCOMING RXCG3) Jul.20 ll:41AM 01’38 01 04
03 <A11> TXCG3D Jul.20 ll:46AM 00’46 01 OK
04 <F2> TXCG3) Jul.20 ll:48AM 00’40 01 OK
05 INCOMING TXCG3) Jul.20 ll:49AM 00’45 01 OK
06 INCOMING TXCG3) Jul.20 11:57AM 00’29 01 OK
07 <F2> TXCG3) Jul.20 ll:59AM 00’20 01 02
08 <F2> TXCG3) Jul.20 12:00PM 00’09 00 02
09 INCOMING RXCG3) Jul.20 12:03PM 00’33 00 06
10 <A11> TXCG3) Jul.20 12:05PM 00’ 16 00 07
>
o
CO
m
Explanation of JOURNAL
(1) Date of printout: Month, Day, Year
(2) Time of Printout; Hour. Minute
(3) Communication number (up to 30)
(4) Dial Number
1736852; The other party’s number dialed manually
is 1736852
A11; Station No. 11 for Speed Dialing is used.
F2; Station No. 2 for One-Touch Dialing is used.
INCOMING; Document or telephone call is received.
(5) Transmissbn/Reception
TX; Transmission
RX; Reception
G3; Communication mode used
(6) Communication start time
(7) Usage time. Minutes; Seconds
(8) Number of pages transmitted or received successfully
(9) Communication result
OK; Successful completion
Numeral: Error code (See Error code below.)
CODE DESCRIPTION CODE DESCRIPTION
01 When the power unit overheats. 04 When transmission/reception error occurs.
02
When transmission is interrupted by pushing the
STOP/CLEAR button.
05 When the printhead overheats.
06 When the unit is out of paper.
03
When a document is jammed or does not feed into
the unit.
07 When the cover is opened.
[SYSTEM Example]
<< SYSTEM
tt01
tt02
«03
«04
«05
«06
«07
«08
«09
«10
«11
«12
«13
«14
SET UP LIST >>
1/ 1/88 12:00AM
SENDER ID =
DELAYED XMT=0FF
SEND AT 12:00AM
SEND TO
REMOTE ID = 111
REC TIME =
VOX
CPC MODE = A
DIAL SPEED = 10
TONE DETECTION
JOURNAL=AUTO
TX REPORT = OFF
TX SPEED = 9600
ID POSITION=OUT
1-18