Panasonic AUTO-LOGIC KX-F3500 - Manual (Page 6)

System Setup
There are 19 user programable functions in the unit. After entering the Programming Mode by pushing the FUNCTION button,
these functions may be selected or changed by pushing the REDIAL or MUTE button.
No. FUNCTION LCD DISPLAY PAGE
01 Date and Time 1/ 1/88 12:00AM See Example on page 6.
02 Logo and Sender’s Identification SENDER ID “ See page 10 in INSTALLATION MANUAL.
03 Delayed Transmission (XMT) DELAYED XMT=OFF See page 1-11.
04 Time of Delayed XMT SEND AT 12:00AM See page 1-11.
05 FAX No. of Delayed XMT SEND TO See page 1-12.
06 Remote ID for remote operation REMOTE ID “ 111 See page 2-2.
07 Caller’s Recording Time REC TIME - VOX See page 2-1.
08 CPC (Calling Party Control) Mode CPC MODE =■ A See page 8 in INSTALLATION MANUAL.
09 Dial Speed for pulse dialing DIAL SPEED = 10 See page 8 in INSTALLATION MANUAL.
10 Tone Detect TONE DETECT-ON See page 8 in INSTALLATION MANUAL.
11 Journal JOURNAL“AUTO See page 1-16.
12 Transmission (TX) Report TX REPORT = OFF See page 1-15.
13 Transmission (TX) Speed TX SPEED » 9600 See page 8 in INSTALLATION MANUAL.
14 ID Position ID POSITION“OUT See page 8 in INSTALLATION MANUAL.
15 Motor Test MOTOR TEST See page 16 in INSTALLATION MANUAL.
16 Printer Test PRINTER TEST See page 16 in INSTALLATION MANUAL.
17 System Print SYSTEM PRINT See page 1-17.
18 Telephone No. List Print TEL LIST PRINT See page 1-17.
19 Journal Print JOURNAL PRINT See page 1-17.
System Setup
1
Push FUNCTION.
SELECT COMMAND
•The following message will be displayed.
2
Push REDIAL or MUTE until the desired message is
displayed.
•By using the REDIAL button, the function is
selected in the order of No. 01,02,03... 19.
•By using the MUTE button, the function is selected
in the order of No. 19,18,17...01.
3
Proceed to each section.
•Refer to page shown above.