Panasonic KX-F50BA - Manual (Page 13)

yj
-r'
® POWER Indicator (p. 1-12):
ALARM Indicator (p. 4-13):
PAPER OUT Indicator:
PROGRAM Indicator:
® Direct Cali Station Keys
(P-1-20):
@ REW (REWIND) Button
(p. 2-10):
®FF (FAST FORWARD)
Button (p. 2-10):
(g) MEMO/2WAY Button
(p. 2-12,2-13):
® PLAYBACK/PAUSE Button
(p. 2-10):
® TONE Button (p. 3-10):
® RECALL Button (p. 3-10):
® REDIAL Button (p. 2-14):
@ MONITOR (VOICE STDBY)
Button and Indicator
(p. 2-3,2-8);
@ PROGRAM Button (p. 1-15):
© A U T O Button (p.1-21):
© PAUSE Button (p. 3-11);
© SET Button (p. 1-16):
© STOP/CLEAR Button
(P-2-3):
START/COPY Button and
Indicator (p. 2-3):
The indicator lights when the POWER switch is
turned on.
The indicator lights when any trouble occurs.
The indicator lights when the recording paper
roll is empty.
The indicator lights or flashes when you are
programming the unit.
Used for one touch dialing.
Used to run the tape quickly backward to a
desired point.
Used to run the tape quickly forward to a
desired point.
Used to start and stop recording of a memo
message or a telephone conversation.
Used to play back recorded messages, or
interrupt playback or FF/REW operation.
Used to change the dialing mode from pulse to
tone during a dialing operation.
Used to access some features of your host PBX.
Used to redial the last dialed number.
Used for on-hook dialing and voice contact
features. The indicator lights when these
functions are on.
Used to start or end programming functions.
Used for speed dialing.
Used to insert a pause into a facsimile
telephone number during programming.
Used to store parameters during programming.
Used to cancel transmission or copy operation.
Also used during programming to clear the
previously entered parameters.
Used to start transmission and copy functions.
The indicator lights when these functions are on.
1-6