Panasonic KX-F50BA - Manual (Page 65)

■ -Ti '
The CPC (Calling Party Control) mode
setting
Select the CPC mode “A" or “B”
depending on your line condition.
A: Set to this mode if your line does not
have special telephone services.
(Default)
B: Set to this mode if your line has special
telephone services such as call waiting
and call forwarding. If some incoming
messages are cut off in mode “A”, set
the mode to “B”.
“I Press the PROGRAM button.
The PROGRAM indicator lights.
Press “#”, then press “31” for the
CPC MODE setting.
Press “1” or “2”.
(1=A, 2=B)
Press the SET button to store your
selection in memory.
Press the PROGRAM button to end
the operation.
The PROGRAM indicator goes out.
TAD RING COUNT
The TAD RING COUNT setting
This function is available only in the
TAD/FAX mode when receiving a call.
If you find there is difficulty in receiving
from machines that have an automatic
transmission feature, set the TAD RING
COUNT number to “2” (twice).
0; Toll Saver*
2\ The unit answers on the 2nd ring.
(Default)
3: The unit answers on the 3rd ring.
4: The unit answers on the 4th ring.
Operation;
"I Press the PROGRAM button.
The PROGRAM indicator lights.
2 Press then press “32" for the
TAD RING COUNT setting.
3 Press “0", “2". “3" or “4”.
(0=Toll Saver, 2=twice,
3=three times, 4=four times)
4 Press the SET button to store your
selection in memory.
5 Press the PROGRAM button to end
the operation.
The PROGRAM indicator goes out.
* Toll Saver function:
When you set the mode to “0", the number
of rings tells you if there are any new
voice-messages recorded.
If the unit answers on the 2nd ring, there is
at least one new message.
If the unit answers on the 4th ring, there
are no new messages.
Hang up immediately when you hear the
3rd ring. The 3rd ring indicates there are
no new messages. This will save you toll
charge for the call.
4-6