With a vcr and cable box, Procedure, Pip) – Panasonic SUPERFLAT CT-27SF25 User Manual
Page 7: Picture in picture (pip) operation p
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Picture In Picture (PIP) Operation
P
icture
I
n
P
icture
(PIP)
O
peration
With a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature. A second video source
(VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
TERMINALS ON BACK OF TV
VCR
Note:
The Remote Control must be programmed with supplied codes to operate the VCR
and Cable Box. See
Programming the Remote Control
in the
Remote Control Quick
Reference Guide.
Procedure
Press the
PIP
button on the Remote Control to display the PIP frame.
Note:
The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
•
Press the
TV/VIDEO
button on the Remote Control to select the video
PIP source.
•
Verify the CABLE BOX and VCR are turned on and the VCR tuned to
Channel 3 or 4,depending on the VCR.
" Choose channels for the
PIP
frame by pressing the
CBL
button on the
Remote Control and using the numeric keypad or
CH
up/down buttons.
•
Choose channels for the
Main Picture
by pressing the
TV
button on the
Remote Control and using the numeric keypad or
CH
up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.
&