With a vcr - no cable box, Pip) o – Panasonic SUPERFLAT CT-27SF25 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
icture
I
n
P
icture
(PIP) O
peration
With a VCR - No Cable Box
This television includes a Picture In Picture (PIP) feature. A second video source
(VCR) is required to provide a second picture.
Connect your television to a VCR, as shown.
Note:
CABLES NOT SUPPLIED
The Remote Control must be programmed with the supplied codes to operate the
VCR.
See
Programming
the
Remote
Control
in
the
Remote Control Quick
Reference Guide.
Procedure
Turn the VCR off and tune the TV to Channel 3 or 4, depending on the
VCR.
Press the
PIP
button on the Remote Control to display the PIP frame on screen.
Note:
The PIP picture is the same as the Main picture, initialiy.
•
Press the
TV/VIDEO
button on the Remote Control to select the VIDEO
PIP source.
•
Press the
VCR
button on the Remote Control and turn the VCR on.
•
Press the
TV/VCR
button on the Remote Control.
•
Choose channels for
PIP frame by
pressing
VCR CHANNEL
up/down
buttons on the Remote Control.
•
Choose channels for the
Main Picture
by pressing the
TV
button on the
Remote Control and using the numeric keypad or
CH
up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for PiP
and Main Picture source status, on screen.