Operating environment, Power source – Panasonic KV-SV50 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Precautions
Operating Environment
Do not subject the unit the following conditions.
Do not place the unit in direct sunlight or in a cold
draft.
Q
Do not place the unit in an area where there is a
lot of smoke, dust, chemical fumes or vibration.
Thinner, etc.
0
Do not place the unit near a heating appliance or
an air conditioning vent. Do not place the unit in a
room with extremely high or low humidity.
Do not place the unit near other appliances.
0
Do not place the unit on a carpet. (Static electricity
can cause the unit to malfunction)
Do not disassemble the unit.
0
0
Power Source
• Use a voltage level which does not vary more than ±10% from the voltage level marked on the name
plate (located on the rear of the scanner).
• Do not use an extension cord.
• This scanner should be connected to a grounded outlet.
• Do not use a line conditioner, transient suppressor or surge protector.