Panasonic KX-P2023 - Manual (Page 29)

Using the Setup Disk
This Setup Disk can only be used in an iBM-PC or a compatible computer.
Before you use the Setup Disk, it is recommended that you make a back-up copy and store the original
in a safe place.
This printer has been factory set to operate with most of the popuiar software packages. In
most cases there wiii be no need to change the initiai setup items. Refer to page 28 to verify
that the factory settings meet your requirements. If no changes are required, you should be
ready to print.
Note:
• Use the DISKCOPY command of the operating system to make a back-up copy. Refer to your
DOS manual for further information.
• Type A:\INSTALL0 to copy the programs from your Setup Disk onto your hard drive. This
procedure automatically creates a directory called 2023 and copies all of the programs from your
Setup Disk onto your hard drive.
Running the initial Setup program
^ Insert your setup disk into either drive A or B.
<For DOS> <For WINDOWS>
o
Type A: (or B:) and
o
press [ Enter). £
3
Type SETUP
3
4
Press ( Enter ] .
4
Select Run from the File menu.
Type A:\SETUP (or B:\SETUP)
^ Click
I
OK
I
(or Press ( Enter )).
Screen 1 [SELECT COUNTRY] will be displayed (for first time installation).
The screen default to a USA
setting. If you do not have to
Screen 1
change this setting, touch
Enter to confirm your country
and advance to screen 2.
If you must select a country
other than USA, refer to
page 30, step1.
Note:
• If you have previously saved your
initial setup settings to disk,
screen
1 [SELECT COUNTRY]
will not be displayed. If you need
to select another country, press
F4 and screen 1 will be displayed.
u
C O
(t>
c
*o
o
Q.
(D
< < Panasonic KX-P2023 Setup Utility (xxxxxxxxxxx)
[SELECT COUNTRY] - for appropriate FACTORY settings
USA
BELGIUM
CHILE
DENMARK
FINLAND
FRANCE
GERMANY
ITALY
NORWAY
PORTUGAL
SPAIN
SWEDEN
TURKEY
UK
OTHER COUNTRY
t T ], I X ] —> Select country
[Enter] —> Confirm country
[ESC] - -> Exit to DOS
29