Display time stamp data, Display time stamp edit, Change time stamp data – Panasonic PV M939 User Manual
Page 29: 1) insert cassette with record tab. 2) press play, 1) press, 3) repeat 1) and 2) as needed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing Time Stamp Data
You
may
change
the
time
stamp
data
(Date,
Time,
Channel,
Category, and Notes) as desired.
1
2
PLAY
m
12/27/19S9 MON
12:00PM-
1:00PM
CH 08 ABC MOVIE
MEMORIAL MOVIE
Display Time Stamp
Data.
1) Insert cassette with
record tab.
2) Press PLAY.
Display TIME STAMP
EDIT.
Press PROG
while the data is
displayed in
playback mode.
3
— TIME STAMP EDIT —
DATE : 12/27/1999 MON
TIME : 12:00PM -
1:00PM
CH ; 08 ABC
CATEGORY : MOVIE
NOTES:E|EMORIAL MOVIE-----------
SELECT:A ▼ KEY
SET : -< ► KEY
END :PROG KEY
Change Time Stamp Data.
1) Press
AT
to
select.
2) Press ► or ◄
to enter and
continue.
• Characters in
NOTES
vy
NI change
in the following
order.
A - B - C ..................... Z- BLANK- - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -9.............. 2 - 1 - 0 - / - ! * — - - - - - - - - - - - - - - - - - - - - - - - - - - '
3) Repeat 1) and
2) as needed.
To Make Corrections
Press to move to the
incorrect entry, then press
AT
to make the correction.
4
Combination VCR automatically
goes into Stop mode.
You cannot use POWER or REC
button while “NOW WRITING
TIME STAMP” is displayed.
SELECT/
SET
A :CH UP
▼ :CH DOWN
► :VOL UP
<
:V0L DOWN
PLAY
29