Copy your tapes (dubbing), Connections you’ll need to make, Select “line” mode – Panasonic PV-C911 User Manual
Page 15: Press rec, then pause/slow, Press pause/slow, Press stop, Playback (source) recording (editing) unit, Selecting input mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Copy Your Tapes (Dubbing)
Connections you’ll need to make.
Playing (Source) VCR
AUDIO VIDEO
O U T C ^
O"
® IN FROM ANT.
IN
O
o
® OUT TO TV
Recording (Editing) unit
Playback (Source)
Recording (Editing) unit
I |
Insert pre
recorded tape.
Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
Select “LINE” mode.
See “Selecting Input Mode” below.
3
Press REC,
then
PAUSE/SLOW
immediately to put in
Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
PAUSE
Press PLAY
then
P-
i\AY
PAUSE
at starting
point to put in
Standby mode.
o
©
Press PLAY
to start dubbing.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
STOP
o
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH
AT.
Hie display will change as follows.
^---------------
' Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
1
LIN
(CABLE) (TV)
—►125 or 69
D
Method 2;
^
line
-
a Press ACTION for MAIN MENU,
b Press AWM ► to select “TV”, then press ACTION
for SET UP TV screen,
c Press
AT
to select “INPUT SELECT,” and
then press ► to select “TUNER” or “LINE."
d Press ACTION twice to exit this mode.
15