Panasonic PV-C911 - Manual (Page 28)

ape Operation (continue
Auto Operation Functions
Auto Shut Off
No broadcast signal in TV, blank tape is
Played for 5 minutes
Power turns off
• This feature is canceled if any button is
pressed during above mode.
Auto Playback
Insert a tape in Power off mode
Power turns on
• Playback begins if tape has no record tab.
• This feature cannot be activated when
the POWER button on the unit is turned
OFF (POWER indicator is not lit.)
Auto Rewind
Tape reaches its end
Rewind, Stop
Playback Auto Eject (Repeat Play is “OFF’)
Tape with no record tab reaches its end
Rewind, Stop, Eject
Tape Position Display.
To find out present tape position and amount of
tape remaining.
Tape position cannot be detected for
C-Cassettes, tapes under 30 minutes, and
some other tapes.
1 Press TAPE POSITION
to detect current tape position.
•“DETECTING TAPE
POSITION” is displayed only
when a cassette is first inserted
and it takes several seconds for
correct tape position to appear.
•The present tape position
indication and amount of tape
remaining (according to tape
speed) is displayed.
•Tape remaining time display
may not be precise.
setEòTtfiò rqn'
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
display -4/ O O O
TAPE I
POSITION-------O O © ©I
COUNTER--liO O © ©
RESET nC=)C*)'^
ACTION
SELECT/
SET
>*-:CH UP
▼;CH DOWN
► ;VOLUP
◄ ;VOL DOWN
CM/2ER0
Model PV-C921/PV-C931W
remote is shown here.
This function cannot display exact amount of
tape remaining for tapes 30 minutes or less,
or for tapes over 120 minutes in length.
28
For assistance, please call; 1-800-211-PANA(7262) or send e-mail to ; [email protected]