Focus or flange-back adjustment – Panasonic CCTV CAMERA WV-BP102 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DC :
The mounted lens is one of the lenses listed on
pages 10, 11 and 12 or one that requires the
DC control signal for auto iris control,
VIDEO :
The mounted lens requires video signal for auto
iris control.
Note ;
Refer to item (5) on page 5 for the lens selection
switch.
Screw
FOCUS OR FLANGE-BACK ADJUSTMENT
The
following
‘
adjustment
should
be
made
by
qualified service personnel or system installers.
1. Loosen screws on the flange-back adjusting ring.
CS-mount Lens
C-mount
Turn the flange-back adjusting ring to the desired
position.
Caution :
Do
not
turn
this
ring
too
much
to
counterclockwise
as
this
could
damage
the
inner glass and CCD image sensor,
Tighten
the screws
on
the flange-back adjusting
ring.
- 16 -