Panasonic CCTV CAMERA WV-BP102 - Manual (Page 19)

INSTALLATION OF CAMERA PREVENTION OF BLOOMING AND SMEAR
Mounting from the top
This camera is originally designed to be mounted
from the top, as shown. The hole is the standard
photographic pan-head screw size (1/4” - 20),
Mounting from the bottom
Remove the mount adaptor from the top of the
camera by removing two fixing screws. Attach
the mount adaptor to the bottom as shown in the
diagram, then mount the camera on the mounting
bracket.
Make sure that two original screws are used
when mounting the mount adaptor ; ionger type
screws may damage inner components.
When the camera is faced toward spot light or other
bright lights and light reflecting objects, smear or
blooming may appear. Therefore, the camera should
be operated carefully in the vicinity of extremely bright
objects to avoid smear or blooming.
LENS MAINTENANCE AND CLEANING
1, Remove the lens connector.
2. Remove the lens, and inspect the camera CCD
faceplate through the lens mount opening to assure
that the faceplate is free of smudges or particles of
dirt,
3. Clean the CCD faceplate, if necessary, using lens
tissue or a cotton tipped applicator and ethanol.
4, Install the new lens.
-
1 7
-