Tuning the tv set to the vcr, Connection – Panasonic TC-26T1Z User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tuning the TV Set to the VCR
^ -
Connection
1 Connect the external aerial to the RF Input Socket on the VCR^
2, Connect the aenal terminal on the TV set to the RF Oinput Socket on the VCR with the supplied
DIN^DIN Coaxial CaDfe
The edjustmente tfeecHbed on this page ane not neceemy, if the VCR la connected to the TV set
via the Video/Audio output eoehets.
1
PRE,
(1)(2)
(3)
F4Jsh the “PRE," (PRESET) Button on the TV set until Ihe on
screen dispbay will appear as shown below
(1) Programms Position Number
(2) Programme Name Writing
(3) Band
(4) Tuning bar
Select the “VCR" position by using ''OVCR” Button on the
Remote Control.
32