General operation on the remote control – Panasonic TC-26T1Z User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[ General Operation on the Remote Control
Note:
Pre-set time may be cancelled in tlw following ways.
(1) Set the Pre-set Time condition to "O'* by Losing the “Off timer" Button.
(2) Tu ming the TV set off, using the “Power" Button on the Remote
Control or tf>e “Power" Switch on the TV set.
P'NR OH
Picture Molee Reduction Button
The Picture Noise Reduction system is a system designed to effectively
reduce the Picture Noise.
The on-screen display will appear as foNows.
When the Picture Noise Reduction System Is ON, the Picture Noise
will be soft.
When the Picture Noise Reduction System is OFF, the Picture Noise
will be sharp.
On the channel of weak broadcasting signal or no signal, the colour on
TV screen wili appear according to the receiving Colour System. And
the noise will be muted automaiicaily.
Note:
When you want to watch the weak broadcasting in spite of the
disturbance, turn the Picture Noise Reduction to ON condition, Then
the TV set will be able to receive the weak broadcasting.
53