Panasonic SVGA Monitor/Receiver CT-36DV60 - Manual (Page 30)

Channel Caption (cont’d.)
Manual Caption
The Channel Caption {Station Identifier) allows you to
input the call names of up to 30 stations into memory
(using up to 4 characters). The call name will then
display, along with the channel number when changing
channels or pressing <R_ ecal D .
enterichannel ^ number
ENTER CAPTION
fi®CEC0aii03OSEl
2. Press ^ or ^ and or ^ to highlight the
Channel Caption Icon.
3. Press to display the Channel Captiori menu.
8. Press or to select first character in
channel caption (STATION IDENTIFIER).
NOTE: To delete characters, press ^ or until an
empty space is displayed and the character
position.
9. Press to move to second character position,
and repeat steps 8 and 9 until the complete caption
is entered (up to 4 characters).
10. Press
A
or
W
repeatedly to highlight ENTER
CHANNEL NUMBER. Then repeat steps 6 through
10 to continue adding Channel Captions
(STATION IDENTIFIERS).
11. Press (teJ) three times to exit menus.
4. Press W to highlight MANUAL CAPTION.
5. Press or to display the Manual Caption
menu.
ENTER CHANNEL NUMBER
CAPJION
U
a c>Q00ii0Si?aaecEBDi
6. Use the Remote Control Keypad or ^ or
to enter channel number you wish to assign a
channel caption (STATION IDENTIFIER).
7. Press ^ to highlight ENTER CAPTION.
-
29
-