Troubleshooting, Preliminary steps, If you suspect something wrong – Panasonic Removable Full Front MP3 WMA /Receiver with CD Changer Control CQ-HR1003U User Manual

Page 56: Troubleshooting tips n common, O troubleshooting, Troubleshooting tips, N common

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Troubleshooting

Preliminary Steps

Check and take steps as described in the tables

below.

If You Suspect Something Wrong

Immediately switch power off.
Disconnect the power.connector and check that

there is neither smoke nor heat from the unit before
asking for repairs. Never try to repair the unit by
yourself because it is dangerous to do so.

Troubleshooting Tips

n Common

(

Trouble

)

(

Caution:

• Do not use the unit if it malfunctions or if there

is something wrong.

• Do not use the unit in abnormal condition, tor

example, without sound, or with smoke or foul

smell, which can cause ignition or electric
shock. Immediately stop using it and call the

store where you purchased it.

Cause/Step

Noise.

__________ >

The display shows

demonstration message.

56

The power goes off sud­

denly without apparent

reason.

CQ-HX1083/HR1QQ3U

Car’s engine switch is not on.

•»Turn your car’s ignition switch to ACC or ON.

Cables are not correctly connected.

»»Connect cables correctly.

^Connect the battery cable to the terminal that is always active.

»Connect the accessory cable to your car’s ACC source.

»Connect the grounding wire to a metal part of the car.

Fuse is burnt.

»Call the store where you purchased the unit, or your nearest

Servicenter (see the attached sheet) and ask for fuse replacement.

Mute is set to ON.

»Set it to OFF.

Cables are not correctly connected.

»Connect cables correctly.

Condensation (dew).

»Wait for a while before use.

A mobile phone is used near the unit.

»Keep the mobile phone away from the unit.

The unit’s grounding wire is not connected securely.

»Check the metal areas of the car body (chassis), and connect the

grounding wire more securely.

Demonstration mode is ON.

»Press [DISP] (display) to cancel demonstration mode.

The safety devices has been triggered by some apparent reason.

^Call the store where you purchased the unit, or your nearest

Servicenter (see the attached sheet).

Advertising