Panasonic FP7750 - Manual (Page 31)

Skyshot Mode
By setting the check size (or other original smaller than letter size) in the
user preset mode, copying from small originals is possible without dark
areas around the image.
Setting of Skyshot mode by key operator (See P 37, 39)
(D No 1 of 3/4 screen Select Skyshot mode function
(2) No 5 of 4/4 screen Input key operator’s code number
(D No 3 of 3/3 screen Input a size (M1)
® No 4 of 3/3 screen Input another size (M2) if necessary
Above sizes must be memorized in M1 and M2
Operation
Check size programming
set dimension press OK
Size-1 fon
70 mm
I 160 mm 11 Y
Position original Press Job
Memory key Select M1 Number of Press
or M2 copies Print
Job memory
select Mem in or Mem # n
( SIZE-0 i^ 70mm X160mm M 1
( SIZE-0 |B| 220mm X 95mm M2
M 3
M4
M5
NOTE ) * changing the sizes in memory, perform above steps (2) to ®
• To reset Skyshot mode, press Reset key
31