Installation, For u.s.a – Panasonic FP7750 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
■ The copier should not be installed in areas with the
following conditions
• Extremely high or low temperature and humidity
Ambient conditions
Temperature 50T-86T
Relative humidity 30% - 80%
• Area where temperature and humidity can change
rapidly
• Direct exposure to sunlight
• Directly in air conditioning flow
• In areas of high dust concentration
• In areas of poor ventilation
• In areas with chemical fume concentration
• In areas with extreme vibration
• With unstable or uneven conditions (floors, etc )
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his/her own expense
Any unauthorized changes or modifications to this equipment would void the users authority to
operate this device