Note – Panasonic RQ-V460 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Manual reverse
Select the playback side by pressing the playback/direction button
during playback.
Auto reverse
When the tape comes to its end, the auto reverse system functions
and the tape direction changes automatically to start playing the
opposite side of the tape.
Set the reverse mode selector to the desired mode.
For playback of both sides of the cassette tape once.
Notes:
•Playback will stop when the end of reverse side is
reached.
•If playback starts from the reverse side, only that side will
be played.
For continuous playback of both sides of the cassette
tape.
C%3
Note:
When the cassette compartment cover is opened or after the
batteries are replaced, the playback will always start from the
forward side.
XBS switch
(RQ-V520)
XBS boosts the low frequency range.
You can enjoy the dynamic low sound.
Dolby noise reduction switch
(
rq
-V520)
This unit includes Dolby noise reduction which reduces the noise.
Set the Dolby noise reduction switch to “ON” to playback a tape
recorded with Dolby noise reduction.
For other tapes, set the switch to “OFF”.
- 10 -