Switch on the power, Press [clockhimer] to select “clock, Press [clock/timer] to finish setting the time – Panasonic SC-AK14 User Manual
Page 11: To mute the volume q, Press [muting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the time
This is a 12’hour display clock.
This example in the figure shows how to set the time for 4:25 p.m.
Switch on the power.
Press [CLOCKHIMER] to select “CLOCK”.
Every time you press the button:
■
CLOCK-*- ©PIJ^Y — ©REC
t— Previous display
O)
c
(within 7 seconds or so)
Press [TUNE/TIME ADJ (V) or (A)] to show the
present time.
I
«
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display the time when system is ON
Press [CLOCK/TIMER) to select “CLOCK".
At ECO mode on, to display the time when system is OFF
Press [-DISP/-DEMO]. □
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.
Convenient functions
Switching displays Q
Press [-DISP/-DEMO] to select the desired spectrum
analyzer.
Every time you press the button:
Normal
L
Peak hold —-Aurora—»Wiper
---------(OFF) ^------------------- 1
To mute the volume Q
by remote control only
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
Press the button again to cancel.
“MUTING" goes out.
Muting can also be canceled by lowering the volume all the
way (--dB).
When the system is turned off, the muting operation will be automatically
canceled.
RQT5S39