Panasonic NV-L25 - Manual (Page 36)

BBi
Note that the original sound will be completely erased dur­
ing audio dubbing.
o e eo
Preparation
• Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
• Reset the Tape Counter to ‘‘0:00.00”.
•Turn the TV set on and select the video playback channel.
o
0
0
Press the Play/x2 Button (►) to locate the point where
you want to start the audio dubbing.
Press the Pause/Still Button (II) at the exact point
where you want to start the audio dubbing.
Press the Audio Dubbing Button (the indicator will light
up).
AUDIO DUB
□
AUDIO DUB O
Q Press the Pause/Still Button ( I I ) once again to release
the tape from pause, and at the same time start the
operation of the audio source. The audio dubbing will
start.
0
Press the Stop Button (■) to stop the audio dubbing. * •
• When a microphone is used for dubbing, do not
place it near the speaker of your TV to prevent
howling noise (acoustic feedback).
• if the erasure prevention tab of the cassette is
missing, no audio dubbing can be made.
• if audio dubbing is performed on a tape recorded in
the NTSC system, the audio dubbing function will
not work correctly.
r\
J
/36)