Fax parameters, Setting fax parameters – Panasonic Panafax UF-750 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FAX PARAMETERS
Your facsimile machine has a variety of adjustable FAX parameters. These
parameters, listed in the Parameter Table, are normally preset for you and do not
need to be changed. If you do want to make change, read the table carefully.
Some parameters, such as the Resolution, Contrast, and Verification Stamp
parameters, can be temporarily changed by simple key operations just before a
transmission is made. When the transmission ends, however, these parameters return
to their preset values. Other parameters can only be changed by the procedure
described below.
Setting FAX Parameters
1
FUNCTION
and
Enter a fax parameter number (always 2
digits) from the Parameter Table (see
pages 32 and 33).
Ex:
[T]
and I
START
1 for
RESOLUTION
01 RESOLUTION
D:STANDARD
Enter the new setting value,
for
FINE.
Ex: 2
(Note: The bracketed number is a factory
preset value which you may ignore.)
30